Rear Hub Assy Replacement

The other day, I noticed the hub rattling of the left rear, so I ordered and replaced the rear hub Assy The work was easier than I thought and completed within an hour, so I made a rear wheel scraper that had been suspended using the EVA seat that arrived last weekend I made a rear wheel scraper that had been suspended from the rear hub Assy replacement, so it took longer to cut the EVA seat into a good shape, so I made it quite large, I expect it to be small to the extent that it is rubbed
It is over and I tested the neighborhood lightly The noise that had been bothered from last year seems to have disappeared Apparently something started to make noise after falling into the groove on the left side at last year's Tango Peninsula rally, the front hub bearing was replaced, and the noise did not disappear even if the drive shaft was replaced, But I thought that the drive system was in sync with the speed of the noise, but apparently it was a rear hub bearing It seems that it is only recently that I noticed that the rattling came out, so it seems that I was running all the time in such a state … Well, it was good to fix that I had been worried about for a long time I loosened the side brake wire and removed it If you remove the brake caliper and remove the brake disc, you can get the hub as a hub … Apparently the hub bearing is separated The hub and brake disc that came with the attached hub and the brake disc are separated Hub Assy replacement The brake caliper and side brake wire are returned and the side brake wire are returned and the hub that was removed Rear wheel scraper made a little larger

関連投稿:

Change of muffler for a car (Mirage) Car maintenance after a long absence, change of engine oil and mission oil and receipt of Chinese carbon frame Mission replacement, etc. Installation of roof ventilator and preparation of Tango Peninsula rally